Dubai ASIC Repair Lab & Diagnostic Center
Certified ASIC Diagnostics &
Component Repair Lab
Factory-trained chip-level micro-soldering, hashboard diagnostics, and rapid replacement turnaround in Dubai and UAE.
24–48 Hours
Rapid SLA Available
100% OEM Silicon
Component Quality
14d Used / 365d New
Warranty Coverage
24h Load Tested
Burn-In Quality Assurance
Chip-Level Micro-Soldering
Automated test jigs and thermal cameras pinpoint failed ASIC dies. Replaced using BGA rework stations and OEM flux.
Power Supply (PSU) Overhauls
Capacitor bank rebuilds, MOSFET refits, and 3,600W max-load bench verification for Bitmain APW and Whatsminer PSUs.
Control Board & EEPROM Flashing
Restoration of corrupted NAND/eMMC flash memory, cryptographic MAC address reprogramming, and firmware patching.
Ultrasonic Chemical De-scaling
Heated ultrasonic solvent baths dissolve desert sand, conductive dust, and corrosive minerals, followed by baking.
Engineering Disciplines
Specialized Engineering Disciplines
Explore our specialized hardware repair services with transparent turnarounds and full bench testing.
Most requested
Chip-Level Hashboard Repair
Complete diagnostic and micro-soldering restoration for Antminer S19/S21 and Whatsminer M30/M50/M60 series hashboards.
- Turnaround SLA
- 24 – 72 Hours
- Supported rigs
- Antminer S21, S21+, S21XP, S21 Hydro, L9, L7, D9, X212, S19 series, Whatsminer M30/M50/M60
- Coverage scope
- Chip replacement, circuit trace jumpering, LDO regulators, temperature sensors
The $35 initial diagnostic fee is 100% credited toward authorized repair invoices.
Why trust our bench
- Restores missing hashrate without replacing entire expensive boards
- Balanced domain voltage across all hashboard chains
- Factory-spec thermal paste and pad reapplication included
Important considerations
- Severely delaminated or charred PCBs require manual assessment before repair
Workflow Lifecycle
5-Step Diagnostic & Repair Lifecycle
A transparent, trackable repair progression from ticket intake to certified live testing.
Intake & Barcode Registration
Drop off in Dubai or ship with provided GCC waybills. We log serials, capture condition photos, and assign a tracking barcode.
Test-Jig Scan & Diagnostic Report
Within 24 hours, our test bench scans every domain, chip, sensor, and trace to produce an itemized fault report.
Transparent Quote Approval
Review your transparent quote online. No repair work is executed without your explicit written approval.
Component-Level Bench Work
Certified engineers replace defective ASIC dies, overhaul power stages, or rebuild damaged circuit traces.
24-Hour Stress Test & Dispatch
Repaired units run for 24 continuous hours on live test rigs to verify hashrate, temperatures, and zero hardware errors before return.
Controlled Hot-Air Reflow & Heatsink Servicing
Temperature-regulated hot-air nozzles and micro-forceps lift degraded ASIC chips without thermal shock or warping multi-layer circuit boards.
Lab Standards & Inclusions
Lab Infrastructure & Standards
Our Dubai electronics lab is equipped with enterprise-grade micro-soldering and testing facilities.
- Automated factory ASIC test fixtures & jigs
- High-resolution thermal imaging cameras
- BGA infrared & hot-air micro-soldering stations
- Heated ultrasonic solvent immersion tanks
- Electronic load testers for 4,000W PSU burn-in
- ESD-protected work benches and humidity-controlled storage
BITMAIN REPAIRS
FAST. RELIABLE. COST-EFFECTIVE.
Professional repair services for Bitmain ASIC miners, helping you maximise uptime and keep your mining operation running efficiently.
HASHBOARD REPAIR
- Pinpoint ASIC die micro-soldering & reballing
- Circuit trace rebuilding & LDO regulator repair
- Fresh thermal paste & ultrasonic solvent bath
- Full factory test-jig domain scan verification
PSU REPAIR
- Capacitor banks & high-power MOSFET overhaul
- Auxiliary transformers & short-circuit protection
- 12V-15V rail calibration & cooling fan servicing
- 3,600W+ electronic load bench burn-in testing
CONTROL BOARD REPAIR
- NAND & eMMC recovery, unbricking bootloader
- Factory Bitmain firmware & kernel restoration
- Ethernet PHY chip replacement & MAC reprogramming
- Data ribbon headers & thermal sensor validation
Comprehensive 14-Day Warranty on all repairs after completion (Used ASICs)
Plus 365 Days Comprehensive Manufacturer Warranty on New ASICs
Experienced Techs
Certified micro-soldering
Quality Components
100% OEM genuine parts
Reduce Downtime
Rapid turnaround speed
Maximise Hash
Full TH/s restoration
Direct Dubai Lab Dispatch & Hotline
+971 58 572 2898Guaranteed Turnaround SLAs
Service Level Agreements (SLAs)
Designed to minimize unrecoverable hashrate losses with guaranteed turnaround benchmarks.
Emergency Rapid SLA
Turnaround Window
24 to 48 Hours
Best for
Critical flagship miners (S21, M60), single-rig operators, immediate downtime recovery
Diagnostic Speed
Immediate bench triage upon arrival
Standard Fleet Batch
Turnaround Window
3 to 5 Business Days
Best for
Fleet maintenance batches (10–50 boards), periodic preventative overhauls
Diagnostic Speed
Itemized diagnostic scan within 24 hours
Enterprise Fleet Retainer
Turnaround Window
Ongoing Scheduled Cycles
Best for
100+ unit colocation clients with dedicated buffer spares on standby
Diagnostic Speed
Instant buffer hot-swap in under 2 hours
Clear Upfront Costs
Transparent Repair Pricing
Upfront economics with diagnostic fees 100% credited toward authorized repair work.
| Lab Service | Service Pricing | Coverage Inclusions |
|---|---|---|
| Hashboard Repair (Bitmain Series) | $70 / board | Pinpoint ASIC die replacement, circuit trace rebuilding, LDO regulators, and fresh thermal compound |
| PSU Repair (Bitmain APW Series) | $80 flat fee | Capacitor banks, MOSFET overhaul, auxiliary transformers, and 3,600W bench load burn-in |
| Control Board Repair | $70 flat fee | NAND/eMMC recovery, firmware restoration, MAC reprogramming, and Ethernet PHY replacement |
| Initial Diagnostic Assessment | $35 / board | Waived 100% if repair is authorized · Includes full domain & chip test-jig scan |
| Ultrasonic Solvent Bath & Repaste | $30 / board | Ultrasonic chemical clean, oven dehydration, and fresh thermal compound |
| Air-to-Hydro Conversion Labor | $180 / machine + kit | Disassembly, cold plate mounting, thermal interface, and 8-Bar leak testing |
← Swipe horizontally to view full pricing table →
Book Bitmain Repair & Bench Triage
Register your faulty ASIC boards or units for priority cleanroom diagnosis. Integrated with our Dubai lab CRM and backed by our comprehensive warranty.
Dubai certified lab · Factory-trained techs · 100% OEM parts
High-Tolerance Handcraft
Component-Level Soldering & Trace Reconstruction
Certified technicians installing 100% genuine OEM silicon, reflowing bypass capacitor networks, and bridging severed copper traces under magnification.
FAQ
Frequently Asked Questions
Common questions regarding intake logistics, warranties, and component repair procedures.
Hashboards must be wrapped in anti-static ESD bags and secured in heavy-duty bubble wrap or custom foam slots within double-walled cardboard boxes. Never ship bare boards in loose peanuts. We provide pre-labeled shipping cartons for UAE and GCC clients upon request.
Don't let faulty hardware eat into your mining yield
Book a bench slot at our Dubai repair facility today or contact our engineering desk via WhatsApp for instant technical triage.